wortmann_shuh_holding_08.jpg
2018-03-13 20_51_35-KeyShot 7.1 Demo  - untitled.bip  - 64 bit.jpg
wortmann_shuh_holding_08.jpg

Intro - Tension Shades


Tension Shades

Models

SCROLL DOWN

Intro - Tension Shades


Tension Shades

Models

Products


Products


//crown tension shade models

CONSTON

Consisting of only one roller at one end and a "Conston" tension rail at the other end, this system can be either motorized or crank operated. Standard C-shaped light blocking side channels or zip track side channels are optional. Applications range from bottom-ups (as shown) to horizontal skylights as large as 80 sq.ft.

CTS

Consisting of one roller and a specially engineered hem bar with a constant tension spring, this system is extremely sleek, minimal and easy to install. CTS runs on AC motorized drives and can be mounted indoors or out. Standard with light tight zip track side channels, no visible tension cables and is regarded as a "set & forget" product due to its robust/proven design.

FTS

Consisting of two rollers on either end of the system, both are Somfy AC motorized drives that work together via a special electronic control unit to maintain constant tension. Standard C-shaped light blocking side channels or zip track side channels are optional. FTS is designed for super large skylights and bottom-up applications.

 

CTS MAX

CTS Max is a larger version of the CTS capable of spanning 197" wide by 236" in projection. Like the CTS the Max has zero visible tension visibles! CTS Max also has an optional integrated water drainage system expanding its functionality to patio cover applications. CTS Max can be installed indoors or out.

//Mounting Options For Conston, FTS and CTS

2018-03-13 20_51_35-KeyShot 7.1 Demo  - untitled.bip  - 64 bit.jpg

CTS


The All New Crown CTS

The Ultimate Tension Shade

CTS


The All New Crown CTS

The Ultimate Tension Shade

//CTS & CTS MAX ADVANTAGES

The most extraordinary advantage that Crown CTS systems provide are its "3-sided" design:

  • Because there is no third side you can position the CTS shades to "meet-in-the-middle" to double the projections to up to 472"!
  • 1 Motor / 1 Roller Tube! Reduces electrical requirements, complexity and after installation servicing.
  • Specially engineered zip track side channels not only lock in the fabric but also hide tension cabling - no visible cables!
  • Adjustable tension springs are hidden within the hem bar of the shade - easily accessible for after installation servicing!

//CTS & CTS MAX MOTORIZATION

  • Power:  AC motors that run on 120vac or 240vac.
  • STD Control: 4-wire motors are controlled by wired AC switches or group controllers using low voltage or dry contact switches. 
  • RF Control: Radio frequency controls such as hand held remotes or wireless wall stations, wind/sun/rain sensors.
  • Digital Network: When specifying Somfy motors Crown CTS (not Max) can be controlled via the Somfy SDN/Animeo building automation systems. [Not available with CTS MAX]

//downloads

//CTS Gallery

//CTS MAX Gallery